Wovember inspirations: designing yarns part 2

Wovember inspirations: designing yarns part 2

Wovember inspirations: designing yarns part 2 The Natural Fibre Company

Here’s some more!  The first part focussed on designing mainly for our Natural Fibre Company customers, so here we look more at how we go about designing the yarns for Blacker Yarns, and the many difficult choices we have to make.  Above you see our “typical Blacker” individual breed yarns, made from carefully sourced fleeces and in several specifications.


Blacker Yarns yarn design: imagining the possible (and viable!)

Why would we want to make a particular yarn?

For Blacker Yarns we do have many options: we can select and blend the fibre from many flocks to create a specific yarn, and we can also work, albeit within the constraints of our equipment, to make a wider variety of yarns in higher volumes than is possible for a small flock.  Even so, each batch will differ and of course we must work towards improved yarns with successive batches, and not worse ones!

Apart from the characteristics of fleece and fibre, there are some more which relate specifically to Blacker Yarns and the yarns we make for sale.  We started by experimenting with a very wide range of yarn styles from a wide variety of breeds, but are gradually refining our offering and here is our thinking …

Is it from a special or rare breed which we wish to support?   But can we realistically support all breeds in all colours?  How much can we expect to sell?

For whatever breed, we need to make a yarn suitable to the fibre and with a specification suitable for its unique style, but we also need to consider repeatability and quality, as well as the cost of the fibre and yarn production. 

With our original Boreray Aran, there was only enough fibre for a few kilograms of yarn, but it was a first and very special and enabled us to donate some of the sales income to the Rare Breeds Survival Trust and the Boreray and Soay sheep breeds society.  By comparison, our St. Kilda lace-weight does contain Boreray and Soay wool but is founded on a solid base of fine Shetland fleece to enable us to eke out the rarer fibre.

Wovember inspirations: designing yarns part 2 The Natural Fibre Company

(By the way, this is a rare picture of Sue modelling one of our patterns! – The view is her best side … )

When it comes to some breeds, which only come in a single colour, but are quite rare, we can simply make a limited edition batch and then source more suitable quality fleeces for the next batch.  This applies to our Norfolk Horn (a lovely off-white aran), our Cotswold (a creamy lustrous DK), Castlemilk Moorit (a delightful firm and plushy DK), and also to our Portland, Llanwenog, Galway and Polwarth, even though the last four are white, but each is different and makes an interesting yarn.

However, we are phasing out Southdown, which, after recovering from rare breed status, is a becoming a successful meat breed.  Southdown, like Suffolk, makes quite a resilient yarn with no great softness of handle, so is less popular as a knitting yarn.  Although the obvious choice for softening by worsted spinning might be considered, Southdown has fibre too short to worsted spin economically, but it makes a great weaving yarn and will continue as a component of some of our softest throws.  Coloured Southdown is rarer and we make this for some specialist producers, through The Natural Fibre Company.  The same thinking applies to Texel.  Also, because these breeds are also popular in commercial flocks, we do not always get a pure-bred selection of fleeces and the variability can remove too much of the characteristics we had sought in a specific breed yarn.

We continue to debate about which yarns to make from naturally coloured wools.  There are subtle but not necessarily very significant differences between colour sorted dark Jacob, Black Welsh Mountain, Hebridean and Zwartbles yarns, also of course very dark brown and black Shetland.  The same applies to the browns of Manx Loaghtan, Castlemilk Moorit and Moorit Shetland or to the greys of Katmogit Shetland, Coloured Ryeland and North Ronaldsay.  However, there are also families of natural colours within a breed, where we can produce a range of shades in Shetland, Jacob, North Ronaldsay, Ryeland and Gotland. 

Wovember inspirations: designing yarns part 2 The Natural Fibre Company

Therefore we have regretfully discontinued Zwartbles, although we do still have plenty of Zwartbles Guernsey yarn, as we felt we had enough variety of handle and style with:

  • Hebridean: a flat off-black, sometimes with a few white or grey hairs, a slight lustre and longer staple, often making absolutely gorgeous in finer yarns from shearlings)
  • Black Welsh Mountain: known as the truest of black blacks, although of course still a very deep black/brown with a shorter staple, no lustre, and excellent for thicker yarn specifications, possibly our most popular yarn amongst the breeds, in a single colour
  • Jacob and Shetland dark: maintained to keep the family of yarn shades and enable projects to be made from a single breed with compatible yarns, as also with Gotland, Ryeland and North Ronaldsay.  However, we are gradually moving from woollen spun to worsted spun Jacob since it makes a softer yarn, although the woollen spun Shetland continues to be amongst our softest yarns.

The same thinking led us to discontinue Border Leicester (despite the colours) and Lleyn, along with a few quality problems in obtaining good fleeces from what is generally a fairly commercial sheep.  These breeds are very popular in the USA, where the quality of fleeces, from what we have seen, is higher.  However, we are continuing with the wonderful Black Leicester Longwool, which, although it may occasionally be coarse, has made a great worsted spun yarn in a lovely soft pewter grey.

Similarly we have decided to make Teeswater in worsted spun but Wensleydale in woollen spun yarns, in order to provide a range of yarn types from relatively similar fleeces.  The lustre of the natural white Teeswater is particularly good for dyed worsted-spun yarns while the opportunity to blend dark and pale Wensleydale gives a nice variety of slightly bulkier but still soft and lustrous yarns.

As we make so much great Herdwick yarn for our Cumbrian customers, we are also phasing out Herdwick, unless popular demand for the great over-dyed aran shades makes us re-consider – the wonderful shading of Herdwick is to some degree addressed by Ryeland, but with a softer handle, so again it is a question of whether we can do everything and the Ryeland has less local champions of its yarns than the Wool Clip and Cumbria are achieving.

Wovember inspirations: designing yarns part 2 The Natural Fibre Company